allVoIP forum  

Τώρα είναι 02 Οκτ 2022, 16:18


Όλοι οι χρόνοι είναι UTC + 2 ώρες [ DST ]




Δημιουργία νέου θέματος Απαντήστε στο θέμα  [ 20 Δημοσιεύσεις ]  Μετάβαση στην σελίδα Προηγούμενη  1, 2
Συγγραφέας Μήνυμα
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 13 Νοέμ 2014, 15:47 
ATA user

Εγγραφή: 22 Μάιος 2014, 15:59
Δημοσιεύσεις: 18
Συνημμένο:
screenshot_1394.jpg

Συνημμένο:
screenshot_1395.jpg

Συνημμένο:
screenshot_1396.jpg

Αν καταλαβα καλά αυτα μου ζητήσατε.
Σας ευχαριστώ


Δεν έχετε τα απαραίτητα δικαιώματα για να δείτε τα συνημμένα αρχεία σε αυτή την δημοσίευση.


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 17 Νοέμ 2014, 10:24 
SIP debugger

Εγγραφή: 26 Μαρ 2009, 20:02
Δημοσιεύσεις: 1007
Θα πρέπει να συνδεθείτε στο cli του Asterisk.

Αφού συνδεθείτε σαν root στο μηχάνημα με το Putty τότε δίνεται την εντολή asterisk -rvvv.

Θα πάρετε ένα δεκαψήφιο και αφού σας βγάλει το πρόβλημα, ανεβάστε εδώ το output του putty.


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 17 Νοέμ 2014, 12:51 
ATA user

Εγγραφή: 22 Μάιος 2014, 15:59
Δημοσιεύσεις: 18
Παράθεση:
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [2105022395@from-internal:1] Macro("SIP/200-00000034", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/200-00000034", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/200-00000034", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/200-00000034", "1?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/200-00000034", "AMPUSER=200") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/200-00000034", "AMPUSERCIDNAME=S900") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/200-00000034", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/200-00000034", "AMPUSERCID=200") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/200-00000034", "CALLERID(all)="S900" <200>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/200-00000034", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/200-00000034", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/200-00000034", "CALLERID(number)=200") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/200-00000034", "CALLERID(name)=S900") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/200-00000034", "Using CallerID "S900" <200>") in new stack
-- Executing [2105022395@from-internal:2] NoOp("SIP/200-00000034", "Calling Out Route: Outside") in new stack
-- Executing [2105022395@from-internal:3] Set("SIP/200-00000034", "MOHCLASS=default") in new stack
-- Executing [2105022395@from-internal:4] Set("SIP/200-00000034", "_NODEST=") in new stack
-- Executing [2105022395@from-internal:5] Macro("SIP/200-00000034", "record-enable,200,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/200-00000034", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/200-00000034", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/200-00000034", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/200-00000034", "0?IN") in new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/200-00000034", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:17] NoOp("SIP/200-00000034", "Recording enable for 200") in new stack
-- Executing [s@macro-record-enable:18] Set("SIP/200-00000034", "CALLFILENAME=OUT200-20141117-114949-1416217789.86") in new stack
-- Executing [s@macro-record-enable:19] Goto("SIP/200-00000034", "record") in new stack
-- Goto (macro-record-enable,s,23)
-- Executing [s@macro-record-enable:23] MixMonitor("SIP/200-00000034", "OUT200-20141117-114949-1416217789.86.gsm,,") in new stack
-- Executing [s@macro-record-enable:24] Set("SIP/200-00000034", "CDR(userfield)=audio:OUT200-20141117-114949-1416217789.86.gsm") in new stack
-- Executing [s@macro-record-enable:25] MacroExit("SIP/200-00000034", "") in new stack
-- Executing [2105022395@from-internal:6] Macro("SIP/200-00000034", "dialout-trunk,1,2105022395,") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/200-00000034", "DIAL_TRUNK=1") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/200-00000034", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/200-00000034", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/200-00000034", "DIAL_NUMBER=2105022395") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/200-00000034", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/200-00000034", "OUTBOUND_GROUP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/200-00000034", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/200-00000034", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/200-00000034", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/200-00000034", "outbound-callerid,1") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/200-00000034", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/200-00000034", "0?Set(REALCALLERIDNUM=200)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/200-00000034", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/200-00000034", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/200-00000034", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/200-00000034", "TRUNKOUTCID=2105026891") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/200-00000034", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/200-00000034", "1?Set(CALLERID(all)=2105026891)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/200-00000034", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/200-00000034", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/200-00000034", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/200-00000034", "1?sub-flp-1,s,1") in new stack
-- Executing [s@sub-flp-1:1] ExecIf("SIP/200-00000034", "1?Return()") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/200-00000034", "OUTNUM=2105022395") in new stack
== Begin MixMonitor Recording SIP/200-00000034
-- Executing [s@macro-dialout-trunk:14] Set("SIP/200-00000034", "custom=DAHDI/g0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/200-00000034", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/200-00000034", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/200-00000034", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/200-00000034", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/200-00000034", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/200-00000034", "DAHDI/g0/2105022395,300,") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called DAHDI/g0/2105022395
-- DAHDI/i1/2105022395-22 is proceeding passing it to SIP/200-00000034
-- DAHDI/i1/2105022395-22 is ringing
-- DAHDI/i1/2105022395-22 is making progress passing it to SIP/200-00000034
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Hungup 'DAHDI/i1/2105022395-22'
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/200-00000034' in macro 'dialout-trunk'
== Spawn extension (from-internal, 2105022395, 6) exited non-zero on 'SIP/200-00000034'
-- Executing [h@from-internal:1] Macro("SIP/200-00000034", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/200-00000034", "0?endmixmoncheck") in new stack
-- Executing [s@macro-hangupcall:2] Set("SIP/200-00000034", "MIXMON_CALLFILENAME=/var/spool/asterisk/monitor/OUT200-20141117-114949-1416217789.86.gsm") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/200-00000034", "1?defaultmixmondir") in new stack
-- Goto (macro-hangupcall,s,5)
-- Executing [s@macro-hangupcall:5] System("SIP/200-00000034", "test -e /var/spool/asterisk/monitor/OUT200-20141117-114949-1416217789.86.gsm") in new stack
-- Executing [s@macro-hangupcall:6] NoOp("SIP/200-00000034", "SYSTEMSTATUS = SUCCESS") in new stack
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/200-00000034", "1?endmixmoncheck") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/200-00000034", "End of MIXMON check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/200-00000034", "1?nomeetmemon") in new stack
-- Goto (macro-hangupcall,s,28)
-- Executing [s@macro-hangupcall:28] NoOp("SIP/200-00000034", "End of MEETME check") in new stack
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/200-00000034", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] NoOp("SIP/200-00000034", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:35] GotoIf("SIP/200-00000034", "1?noautomon2") in new stack
-- Goto (macro-hangupcall,s,41)
-- Executing [s@macro-hangupcall:41] NoOp("SIP/200-00000034", "MONITOR_FILENAME=") in new stack
-- Executing [s@macro-hangupcall:42] GotoIf("SIP/200-00000034", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,45)
-- Executing [s@macro-hangupcall:45] GotoIf("SIP/200-00000034", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,48)
-- Executing [s@macro-hangupcall:48] GotoIf("SIP/200-00000034", "1?theend") in new stack
-- Goto (macro-hangupcall,s,50)
-- Executing [s@macro-hangupcall:50] AGI("SIP/200-00000034", "hangup.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
-- <SIP/200-00000034>AGI Script hangup.agi completed, returning 0
-- Executing [s@macro-hangupcall:51] Hangup("SIP/200-00000034", "") in new stack
== Spawn extension (macro-hangupcall, s, 51) exited non-zero on 'SIP/200-00000034' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/200-00000034'
== MixMonitor close filestream (mixed)
== End MixMonitor Recording SIP/200-00000034


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 18 Νοέμ 2014, 16:59 
SIP debugger

Εγγραφή: 26 Μαρ 2009, 20:02
Δημοσιεύσεις: 1007
Φαίνεται ότι καλεί κανονικά αλλά δεν απαντάει ο αριθμός που παίρνετε, εσείς τι ακούτε στο ακουστικό σας;


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 18 Νοέμ 2014, 17:21 
ATA user

Εγγραφή: 22 Μάιος 2014, 15:59
Δημοσιεύσεις: 18
Ακούω κανονικά οτι καλεί.Απλά έχω την καθυστερηση που ειπα πριν βγάλει τη γραμμή.
Οταν λέτε δεν απανταει προφανως εννοείτε οτι αυτος που καλεσα δεν το σηκωσε...αυτο ισχυει...δεν απαντηθηκε η κλήση και το εκλεισα.
Όλα αυτά όμως τι σχέση εχουν με το dial plan του cisco?


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 20 Νοέμ 2014, 15:43 
SIP debugger

Εγγραφή: 26 Μαρ 2009, 20:02
Δημοσιεύσεις: 1007
Έχει σχέση γιατί βάζοντας S0 μετά από κάθε pattern λέμε στο spa112 να κάνει αμέσως dial μόλις συμπληρωθούν τα ψηφία του pattern και να μην περιμένει να κάνει timeout καθυστερώντας την κλήση.

Στο dialplan που έχετε τώρα υπάρχει το pattern 2xxxxxxxxxS0;


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 20 Νοέμ 2014, 15:51 
ATA user

Εγγραφή: 22 Μάιος 2014, 15:59
Δημοσιεύσεις: 18
Τωρα έχω το default γιατι μονο αυτο λειτουργει.

(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 20 Νοέμ 2014, 17:16 
SIP debugger

Εγγραφή: 26 Μαρ 2009, 20:02
Δημοσιεύσεις: 1007
Δοκιμάστε να προσθέσετε μετά την αρχική παρένθεση το παρακάτω

xxxxxxxxxxS0 |

Δοκιμάστε να κάνετε κάποια κλήση. Ανεβάστε τι σας βγάζει στο cli.


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 20 Νοέμ 2014, 18:04 
ATA user

Εγγραφή: 22 Μάιος 2014, 15:59
Δημοσιεύσεις: 18
Τωρα λειτουργει δηλαδη βγαζει κληση αλλα με την ιδια καθυστερηση.
Παράθεση:
Connected to Asterisk 11.13.0 currently running on elastix (pid = 2970)
-- Registered SIP '300' at 172.20.20.26:5060
-- Registered SIP '200' at 172.20.20.26:5060
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Executing [6977707813@from-internal:1] Macro("SIP/300-000000fc", "user-callerid,SKIPTTL,") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/300-000000fc", "AMPUSER=300") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/300-000000fc", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/300-000000fc", "1?Set(REALCALLERIDNUM=300)") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/300-000000fc", "AMPUSER=300") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/300-000000fc", "AMPUSERCIDNAME=S79H") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/300-000000fc", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/300-000000fc", "AMPUSERCID=300") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/300-000000fc", "CALLERID(all)="S79H" <300>") in new stack
-- Executing [s@macro-user-callerid:9] ExecIf("SIP/300-000000fc", "0?Set(CHANNEL(language)=)") in new stack
-- Executing [s@macro-user-callerid:10] GotoIf("SIP/300-000000fc", "1?continue") in new stack
-- Goto (macro-user-callerid,s,19)
-- Executing [s@macro-user-callerid:19] Set("SIP/300-000000fc", "CALLERID(number)=300") in new stack
-- Executing [s@macro-user-callerid:20] Set("SIP/300-000000fc", "CALLERID(name)=S79H") in new stack
-- Executing [s@macro-user-callerid:21] NoOp("SIP/300-000000fc", "Using CallerID "S79H" <300>") in new stack
-- Executing [6977707813@from-internal:2] NoOp("SIP/300-000000fc", "Calling Out Route: Outside") in new stack
-- Executing [6977707813@from-internal:3] Set("SIP/300-000000fc", "MOHCLASS=default") in new stack
-- Executing [6977707813@from-internal:4] Set("SIP/300-000000fc", "_NODEST=") in new stack
-- Executing [6977707813@from-internal:5] Macro("SIP/300-000000fc", "record-enable,300,OUT,") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/300-000000fc", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/300-000000fc", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/300-000000fc", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/300-000000fc", "0?IN") in new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/300-000000fc", "0?MacroExit()") in new stack
-- Executing [s@macro-record-enable:17] NoOp("SIP/300-000000fc", "Recording enable for 300") in new stack
-- Executing [s@macro-record-enable:18] Set("SIP/300-000000fc", "CALLFILENAME=OUT300-20141120-170306-1416495786.409") in new stack
-- Executing [s@macro-record-enable:19] Goto("SIP/300-000000fc", "record") in new stack
-- Goto (macro-record-enable,s,23)
-- Executing [s@macro-record-enable:23] MixMonitor("SIP/300-000000fc", "OUT300-20141120-170306-1416495786.409.gsm,,") in new stack
-- Executing [s@macro-record-enable:24] Set("SIP/300-000000fc", "CDR(userfield)=audio:OUT300-20141120-170306-1416495786.409.gsm") in new stack
-- Executing [s@macro-record-enable:25] MacroExit("SIP/300-000000fc", "") in new stack
-- Executing [6977707813@from-internal:6] Macro("SIP/300-000000fc", "dialout-trunk,1,6977707813,") in new stack
== Begin MixMonitor Recording SIP/300-000000fc
-- Executing [s@macro-dialout-trunk:1] Set("SIP/300-000000fc", "DIAL_TRUNK=1") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/300-000000fc", "0?sub-pincheck,s,1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/300-000000fc", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/300-000000fc", "DIAL_NUMBER=6977707813") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/300-000000fc", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/300-000000fc", "OUTBOUND_GROUP=OUT_1") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/300-000000fc", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/300-000000fc", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/300-000000fc", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/300-000000fc", "outbound-callerid,1") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/300-000000fc", "0?Set(CALLERPRES()=)") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/300-000000fc", "0?Set(REALCALLERIDNUM=300)") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/300-000000fc", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/300-000000fc", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/300-000000fc", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/300-000000fc", "TRUNKOUTCID=2105026891") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/300-000000fc", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/300-000000fc", "1?Set(CALLERID(all)=2105026891)") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/300-000000fc", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/300-000000fc", "0?Set(CALLERID(all)=)") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/300-000000fc", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
-- Executing [s@macro-dialout-trunk:12] GosubIf("SIP/300-000000fc", "1?sub-flp-1,s,1") in new stack
-- Executing [s@sub-flp-1:1] ExecIf("SIP/300-000000fc", "1?Return()") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("SIP/300-000000fc", "OUTNUM=6977707813") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/300-000000fc", "custom=DAHDI/g0") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/300-000000fc", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^default))") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/300-000000fc", "dialout-trunk-predial-hook,") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/300-000000fc", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/300-000000fc", "0?bypass,1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/300-000000fc", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/300-000000fc", "DAHDI/g0/6977707813,300,") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called DAHDI/g0/6977707813
-- DAHDI/i1/6977707813-8e is proceeding passing it to SIP/300-000000fc
-- DAHDI/i1/6977707813-8e is making progress passing it to SIP/300-000000fc
-- DAHDI/i1/6977707813-8e is ringing
-- PROGRESS with cause code 17 received
-- PROGRESS with 'user busy' received, signaling AST_CONTROL_BUSY instead of AST_CONTROL_PROGRESS
-- DAHDI/i1/6977707813-8e is busy
-- Hungup 'DAHDI/i1/6977707813-8e'
== Everyone is busy/congested at this time (1:1/0/0)
-- Executing [s@macro-dialout-trunk:20] NoOp("SIP/300-000000fc", "Dial failed for some reason with DIALSTATUS = BUSY and HANGUPCAUSE = 17") in new stack
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/300-000000fc", "s-BUSY,1") in new stack
-- Goto (macro-dialout-trunk,s-BUSY,1)
-- Executing [s-BUSY@macro-dialout-trunk:1] NoOp("SIP/300-000000fc", "Dial failed due to trunk reporting BUSY - giving up") in new stack
-- Executing [s-BUSY@macro-dialout-trunk:2] PlayTones("SIP/300-000000fc", "busy") in new stack
-- Executing [s-BUSY@macro-dialout-trunk:3] Busy("SIP/300-000000fc", "20") in new stack
== Spawn extension (macro-dialout-trunk, s-BUSY, 3) exited non-zero on 'SIP/300-000000fc' in macro 'dialout-trunk'
== Spawn extension (from-internal, 6977707813, 6) exited non-zero on 'SIP/300-000000fc'
-- Executing [h@from-internal:1] Macro("SIP/300-000000fc", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/300-000000fc", "0?endmixmoncheck") in new stack
-- Executing [s@macro-hangupcall:2] Set("SIP/300-000000fc", "MIXMON_CALLFILENAME=/var/spool/asterisk/monitor/OUT300-20141120-170306-1416495786.409.gsm") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/300-000000fc", "1?defaultmixmondir") in new stack
-- Goto (macro-hangupcall,s,5)
-- Executing [s@macro-hangupcall:5] System("SIP/300-000000fc", "test -e /var/spool/asterisk/monitor/OUT300-20141120-170306-1416495786.409.gsm") in new stack
-- Executing [s@macro-hangupcall:6] NoOp("SIP/300-000000fc", "SYSTEMSTATUS = SUCCESS") in new stack
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/300-000000fc", "1?endmixmoncheck") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] NoOp("SIP/300-000000fc", "End of MIXMON check") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("SIP/300-000000fc", "1?nomeetmemon") in new stack
-- Goto (macro-hangupcall,s,28)
-- Executing [s@macro-hangupcall:28] NoOp("SIP/300-000000fc", "End of MEETME check") in new stack
-- Executing [s@macro-hangupcall:29] GotoIf("SIP/300-000000fc", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,34)
-- Executing [s@macro-hangupcall:34] NoOp("SIP/300-000000fc", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:35] GotoIf("SIP/300-000000fc", "1?noautomon2") in new stack
-- Goto (macro-hangupcall,s,41)
-- Executing [s@macro-hangupcall:41] NoOp("SIP/300-000000fc", "MONITOR_FILENAME=") in new stack
-- Executing [s@macro-hangupcall:42] GotoIf("SIP/300-000000fc", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,45)
-- Executing [s@macro-hangupcall:45] GotoIf("SIP/300-000000fc", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,48)
-- Executing [s@macro-hangupcall:48] GotoIf("SIP/300-000000fc", "1?theend") in new stack
-- Goto (macro-hangupcall,s,50)
-- Executing [s@macro-hangupcall:50] AGI("SIP/300-000000fc", "hangup.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/hangup.agi
-- <SIP/300-000000fc>AGI Script hangup.agi completed, returning 0
-- Executing [s@macro-hangupcall:51] Hangup("SIP/300-000000fc", "") in new stack
== Spawn extension (macro-hangupcall, s, 51) exited non-zero on 'SIP/300-000000fc' in macro 'hangupcall'
== Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/300-000000fc'
== MixMonitor close filestream (mixed)
== End MixMonitor Recording SIP/300-000000fc


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
 Θέμα δημοσίευσης: Re: Dial Plan SPA112
ΔημοσίευσηΔημοσιεύτηκε: 26 Νοέμ 2014, 17:39 
SIP debugger

Εγγραφή: 26 Μαρ 2009, 20:02
Δημοσιεύσεις: 1007
Είναι πιθανόν να μην μπορείτε να πάτε πιο κάτω επειδή χρειάζεται μια μικρή καθυστέρηση στα αναλογικά για να σταθεροποιηθεί η γραμμή και για το callerid (κυρίως στη λήψη κλήσεων). Επίσης αν χρησιμοποιείτε ασύρματα υπάρχει πάντοτε λίγο παραπάνω καθυστέρηση ανάλογα με το τηλέφωνο και πως επικοινωνεί με τη βάση.

Αν μπορείτε να πάτε σε κάποια λύση με κάρτες είναι πιθανόν να μειωθεί λίγο ο χρόνος αλλά όχι κάτι δραματικό. Η καλύτερη προσέγγιση θα ήταν ip συσκευές.


Κορυφή
Χωρίς σύνδεση Προφίλ  
 
Τελευταίες δημοσιεύσεις:  Ταξινόμηση ανά  
Δημιουργία νέου θέματος Απαντήστε στο θέμα  [ 20 Δημοσιεύσεις ]  Συντονιστής: allVoIP team Μετάβαση στην σελίδα Προηγούμενη  1, 2

Όλοι οι χρόνοι είναι UTC + 2 ώρες [ DST ]


Μέλη σε σύνδεση

Μέλη σε αυτή την Δ. Συζήτηση : Δεν υπάρχουν εγγεγραμμένα μέλη και 1 επισκέπτης


Δεν μπορείτε να δημοσιεύετε νέα θέματα σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να απαντάτε σε θέματα σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να επεξεργάζεστε τις δημοσιεύσεις σας σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να διαγράφετε τις δημοσιεύσεις σας σε αυτή τη Δ. Συζήτηση
Δεν μπορείτε να επισυνάπτετε αρχεία σε αυτή τη Δ. Συζήτηση

Αναζήτηση για:
Μετάβαση σε:  
cron
Copyright © 2008-2020, allVoIP.gr